Technical University of Liberec – Faculty of Mechanical Engineering
Liberec, CzechiaPOTENTIAL — not yet offered / not confirmed
🟢 Strong fit: official 2026/27 English list (about 70 courses, 2-6 ECTS) covers fluid mechanics, heat transfer, mechanics, machine parts, CAD/CNC, additive tech, control, robotics and AI
English-taught programme: Faculty of Mechanical Engineering (FS TUL) publishes a preliminary 2026/27 list of English-taught courses for Erasmus+ incoming students, mixing BSc and MSc level (prerequisites apply). WS = Sept-Jan, SS = Feb-June; typical load is about 30 ECTS per semester. Several courses have minimum/maximum student numbers, so they may not run. The 'Design Materials' entry (code KM*M, 3 ECTS) carries a heat-treatment annotation, so it is treated as the Heat Treatment course.
Potential matches only. This partner currently has no HMU Mechanical Engineering students / no recognised courses. The matches below are an indicative assessment by the IRO, based on the partner’s published English programme vs the HMU Mechanical Engineering study guide. They must be evaluated and approved by the departmental academic coordinator before any agreement is used.
| Partner course / module (ECTS) | Possible HMU equivalent (ECTS) | Fit | Offered | |
|---|---|---|---|---|
| Fluid Mechanics (MT, BSc) (5) Fluid properties, hydrostatics, viscous and inviscid flow, laminar/turbulent flow, hydraulic losses. Prerequisites: maths, physics. | → | Fluid Mechanics I Μηχανική Ρευστών Ι (5) | strong | W |
| Thermodynamics and Heat Transfer (TST, BSc) (5) Laws of thermodynamics, ideal and real gases, cycles, humid air, plus basics of heat conduction, convection and radiation. | → | Thermodynamics I Θερμοδυναμική Ι (5) | strong | S |
| Thermodynamics and Heat Transfer (TST, BSc) (5) Only the final part of the course covers heat transfer fundamentals, so the overlap with Heat Transfer I is partial. | → | Heat Transfer I Μετάδοση Θερμότητας Ι (5) | likely | S |
| Heat and Mass Transfer (PTH, MSc) (5) Conduction (steady/unsteady), convection, phase change, radiation, mass transfer. Prerequisites: Thermodynamics, Fluid Mechanics. | → | Heat Transfer I Μετάδοση Θερμότητας Ι (5) | likely | W |
| Heat and Mass Transfer (PTH, MSc) (5) MSc-level content with mass transfer and phase change, which suits an advanced Heat Transfer II. | → | Heat Transfer II Μετάδοση Θερμότητας ΙΙ (5) | likely | W |
| Experimental Methods (EXM, KST, MSc) (4) Sensors, calibration, measuring amplifiers, signal handling and sensor design. | → | Sensors and Measurement Systems Αισθητήρια Όργανα και Συστήματα Μετρήσεων (5) | likely | S |
| Experimental Methods (TM, KEZ, BSc) (4) Pressure, temperature, humidity, flow and torque/rpm measurement in thermal-fluid systems. | → | Sensors and Measurement Systems Αισθητήρια Όργανα και Συστήματα Μετρήσεων (5) | weak | S |
| Experimental Methods (EXPM, KTS, MSc) (4) Measurement techniques including CTA and optical methods. | → | Sensors and Measurement Systems Αισθητήρια Όργανα και Συστήματα Μετρήσεων (5) | weak | W |
| Experimental Methods in Fluid Mechanics and Thermodynamics (EXMT, MSc) (4) Theory plus practical measurement. Limited to 10 students and the prerequisites are still 'in process'. | → | Fluid Mechanics II Μηχανική Ρευστών ΙΙ (5) | weak | W |
| Piping Systems and their Regulation (PSR, MSc) (4) Layout and calculation of pipe networks for liquids, gases and vapours, plus control elements. Applied fluid mechanics only. | → | Fluid Mechanics II Μηχανική Ρευστών ΙΙ (5) | weak | W |
| Technical Building Equipment (TZAB, MSc) (5) Building technical systems. Prerequisites: Thermodynamics, Fluid Mechanics. | → | Mechanical Installations in Buildings Μηχανολογικές Εγκαταστάσεις Κτιρίων | likely | W |
| Technical Building Equipment (TZAB, MSc) (5) Possible partial HVAC overlap, but the syllabus is not confirmed. | → | Heating, Cooling and Air Conditioning I (HVAC I) Θέρμανση Ψύξη Κλιματισμός Ι (5) | weak | W |
| Design of Thermal Machines (TSK, MSc) (6) Power engineering and power machines design. Needs Thermodynamics/TST first, and the machine types are not specified. | → | Gas Turbines and Compressors Αεριοστρόβιλοι – Συμπιεστές (5) | weak | S |
| Design of Thermal Machines (TSK, MSc) (6) Alternative mapping to turbomachinery. Machine types are not specified. | → | Hydrodynamic Machines (Turbomachinery) Υδροδυναμικές Μηχανές (5) | weak | S |
| Sustainable Sources in Energy and Transport (UZED, BSc) (2) Small 2 ECTS course, possible partial match with energy and circular economy. | → | Energy and Circular Economy Ενεργειακή και Κυκλική Οικονομία | weak | S |
| Driving Units I (POJ1, BSc/MSc) (5) Vehicle powertrain and engines. Prerequisites include KMS. | → | Internal Combustion Engines and Hybrid Technology Μηχανές Εσωτερικής Καύσης και Υβριδική Τεχνολογία (5) | likely | W |
| Design Materials / Heat Treatment (KM*M, MSc) (3) Annotation covers heat treatment of steels, cast iron and non-ferrous alloys: annealing, quenching, tempering, chemical-thermal and surface treatment. | → | Materials Technology II Τεχνολογία Υλικών ΙΙ (5) | likely | W |
| Surface Treatments (MSc) (5) Coating and surface modification of materials, a partial fit for Materials Technology II. | → | Materials Technology II Τεχνολογία Υλικών ΙΙ (5) | weak | S |
| Production Machines I (VS1, MSc) (4) Machine-tool design, not a CNC-specific course. Prerequisites: CAD I, II. | → | Non-conventional CNC Machine Tools Μη συμβατικές εργαλειομηχανές CNC | weak | W |
| Production Machines II (VS2*M, MSc) (6) Design of forming machines (presses, hammers, clutches, brakes, assembly machines), a loose fit with non-conventional machine tools. | → | Non-conventional CNC Machine Tools Μη συμβατικές εργαλειομηχανές CNC | weak | S |
| Programming and Servicing of CNC Machines (CNC*M, BSc/MSc) (5) CNC programming and servicing, directly comparable to CAM/CNC. | → | Principles of Computer Aided Manufacturing (CNC) Αρχές Ψηφιακής Καθοδήγησης Μηχανών (5) | strong | S |
| Additive Technology (ADIT, BSc/MSc) (5) Rapid prototyping and 3D printing methods, data requirements, hybrid technology. Max 10 students. Prerequisites: CAD I, II. | → | Principles of Additive Manufacturing (3D Printing) Αρχές Προσθετικής Κατασκευής (5) | strong | W |
| 3D Digitization and Reverse Engineering (3DR*M, MSc) (4) 3D scanning and reverse engineering. Min 5 and max 10 students. | → | Precision Engineering and Reverse Engineering Λεπτομηχανική – Αντίστροφη Μηχανική (5) | likely | W |
| Applied Cybernetics (AK-B, BSc) (4) Control and cybernetics basics. Min 2 students. Prerequisite for Artificial Intelligence. | → | Control Theory and Technology Θεωρία και Τεχνολογία Ελέγχου (4) | likely | W |
| Automatic Control Theory (TAR*M, MSc) (5) Direct match for automatic control systems. | → | Automatic Control Systems Συστήματα Αυτομάτου Ελέγχου (5) | strong | S |
| Automatic Control Theory (TAR*M, MSc) (5) Alternative mapping to Control Theory and Technology. | → | Control Theory and Technology Θεωρία και Τεχνολογία Ελέγχου (4) | likely | S |
| Programmable Logic Systems (PLS*M, MSc) (5) PLC-based industrial control. | → | Industrial Control Βιομηχανικός Έλεγχος (5) | likely | S |
| Robots and Manipulators (ROBM, MSc) (5) Max 20 students. | → | Robotics I Ρομποτική Ι (5) | likely | W |
| Automatization and Robotics in Mechanical Engineering (ARS, BSc) (4) Introductory automation and robotics. | → | Robotics I Ρομποτική Ι (5) | weak | W |
| Robot Vision (ROV, MSc) (4) Direct match for machine vision. Max 20 students. | → | Machine Vision Μηχανική Όραση (5) | strong | S |
| Artificial Intelligence (UI*M, MSc) (5) Offered in both WS and SS. Covers neural networks, genetic algorithms and image/signal processing. Prerequisite: Applied Cybernetics. | → | Machine Learning and Artificial Intelligence Μάθηση Μηχανών – Τεχνητή Νοημοσύνη (5) | likely | W/S |
| Introduction to Artificial Intelligence and Extended Reality (AIXR, BSc) (3) Introductory AI, machine learning, VR/AR in Industry 4.0 context. Min 5, max 12 students. | → | Machine Learning and Artificial Intelligence Μάθηση Μηχανών – Τεχνητή Νοημοσύνη (5) | weak | W |
| Electro Pneumatic Actuators (EP, MSc) (4) Max 12 students. | → | Actuators for Mechatronic Systems Επενεργητές για Μηχατρονικά Συστήματα (5) | likely | W |
| Servomechanisms (PSS*M, MSc) (4) Min 5, max 10 students. | → | Actuators for Mechatronic Systems Επενεργητές για Μηχατρονικά Συστήματα (5) | likely | S |
| Hydraulic Elements and Circuits (HPO*M, MSc) (6) Hydraulic actuation, proportional valves and circuit design. | → | Actuators for Mechatronic Systems Επενεργητές για Μηχατρονικά Συστήματα (5) | weak | S |
| Mechanics I (Statics) (STA, BSc) (5) Same title as the HMU course. | → | Mechanics I – Statics Μηχανική Ι – Στατική (5) | strong | S |
| Mechanics II (Kinematics) (KIN, BSc) (5) Kinematics of mechanisms only, so only part of Dynamics is covered. | → | Mechanics II (Dynamics) Μηχανική ΙΙ (5) | weak | W |
| Mechanics III (Dynamics) (DYN, BSc) (5) Prerequisites: STA, KIN, maths. | → | Mechanics II (Dynamics) Μηχανική ΙΙ (5) | strong | S |
| Mechanical Vibration (KMS*M, BSc/MSc) (5) Nonlinear and continuous systems, FEM for vibration, modal analysis, rotor dynamics. | → | Dynamics and Mechanical Vibrations Δυναμική – Ταλαντώσεις (5) | strong | W |
| Elasticity and Strength 1 (PP1, BSc) (5) Prerequisites: STA and KMA2. | → | Mechanics III (Strength of Materials) Μηχανική ΙΙΙ (Αντοχή Υλικών) (5) | strong | S |
| Fatigue of Structures and Materials (DPZ, MSc) (5) Advanced strength topic, a partial overlap at best. | → | Mechanics III (Strength of Materials) Μηχανική ΙΙΙ (Αντοχή Υλικών) (5) | weak | S |
| Machine Parts and Mechanisms I (CSI, BSc) (5) Entrance test on mechanics and strength required. | → | Machine Elements I Στοιχεία Μηχανών Ι (5) | strong | S |
| Machine Parts and Mechanisms II (CSII, BSc) (5) Gears, gearboxes, clutches. Requires completion of CSI. | → | Machine Elements II Στοιχεία Μηχανών ΙΙ (5) | strong | W |
| CAD Structural Design (KPR, BSc) (3) CAD-based machine design project work. | → | Mechanical Design I / CAD Μηχανολογικό Σχέδιο Ι / CAD (5) | likely | W |
| CAD – Constructive Geometries (CADKG, BSc) (4) 3D CAD modelling. | → | 3D Computer Aided Design (3D CAD) Τρισδιάστατη μοντελοποίηση (3D CAD) (4) | likely | W |
| CA Technology (CAT*M, MSc) (4) Computer-aided technology: CAM, casting and mould virtual modules. | → | 3D Computer Aided Design (3D CAD) Τρισδιάστατη μοντελοποίηση (3D CAD) (4) | weak | W |
| Principles of Product Design (PNV*M, MSc) (5) Design process and product development. | → | Machine Design and Development Μελέτη – Κατασκευή Μηχανών (5) | likely | W |
| Design Methodology (MKO, MSc) (4) Min 2 students. Prerequisites: CAD, Machine Parts and Mechanisms. | → | Machine Design and Development Μελέτη – Κατασκευή Μηχανών (5) | likely | S |
| Mechanism Design (SM, MSc) (5) Mechanism synthesis. Prerequisites: CAD, Machine Parts and Mechanisms. | → | Machine Design and Development Μελέτη – Κατασκευή Μηχανών (5) | weak | W |
| Innovation Engineering (INI*M, MSc) (6) Team-based product innovation project. | → | Innovation and Entrepreneurship Καινοτομία και Επιχειρηματικότητα (4) | likely | W |
| Project Management (RIP, MSc) (4) Management content, not production-specific. | → | Business and Production Administration Οργάνωση και Διοίκηση Επιχειρήσεων και Παραγωγής (5) | weak | S |
| Industrial Engineering (PI*M, MSc) (6) Industrial engineering methods, lean production, maintenance. Max 12 students. Student can choose VLOG or PI*M, not both. | → | Business and Production Administration Οργάνωση και Διοίκηση Επιχειρήσεων και Παραγωγής (5) | weak | S |
| Industrial Engineering (PI*M, MSc) (6) Includes a maintenance component. | → | Industrial Systems and Maintenance Βιομηχανικά Συστήματα και Συντήρηση (5) | weak | S |
| Technical Diagnostics (TD, BSc/MSc) (4) Diagnostics and vibration-based condition monitoring, relevant to maintenance. | → | Industrial Systems and Maintenance Βιομηχανικά Συστήματα και Συντήρηση (5) | weak | S |
| Statistics for Engineering (IS, BSc/MSc) (4) Reliability, acceptance sampling and statistical inference. | → | Probability and Statistics Πιθανότητες – Στατιστική (5) | likely | W |
| Numerical Simulation in Machine Design (NSM, MSc) (4) Prerequisites: CAD, FEM fundamentals, modelling and simulation. | → | Analysis of Mechanical Structures I (FEM) Ανάλυση Κατασκευών I (5) | likely | W |
| Modelling of Mechanical Systems (MMSV, MSc) (5) Partial FEM overlap only. | → | Analysis of Mechanical Structures I (FEM) Ανάλυση Κατασκευών I (5) | weak | W |
| Modelling and Simulation (MOD, BSc) (4) Modelling and simulation basics. Min 2 students. | → | Numerical Analysis – Computer Programming for Engineers Στοιχεία Αριθμητικής Ανάλυσης – Πληροφορική για Μηχανικούς (4) | weak | W |
| Calculations of Polymer and Composite Parts (VPKD, MSc) (5) Design calculations for polymer and composite components. | → | Polymer and Composite Materials Technology Τεχνολογία Πολυμερών και Σύνθετων Υλικών | likely | W |
| Simulation of Polymer Processing (SPP, MSc) (5) Polymer processing simulation. | → | Polymer and Composite Materials Technology Τεχνολογία Πολυμερών και Σύνθετων Υλικών | weak | S |
| Technical Communication (TEK*M, MSc) (3) Likely technical writing and communication, not English terminology specifically. | → | English Technical Terminology Αγγλική Τεχνική Ορολογία (2) | weak | W |
| Experimental Methods in Metal Forming (EMMF, MSc) (5) Forming-process experiments, a weak fit for Manufacturing Processes II. | → | Manufacturing Processes II Κατασκευαστικές Τεχνολογίες ΙΙ (5) | weak | W |
Offered = indicative term at the partner (W = winter/autumn semester, S = spring/summer semester, W/S = both semesters), from the partner’s published course catalogue. Not based on past mobilities; can change year to year — confirm with the coordinator. “—” = term not published.
Sources: TUL FS: List of English taught courses for Erasmus+ incoming students 2026/27 (PDF) · TUL Erasmus incoming students: course catalogue